Polythene (Solid/Foam/Foam Skin) Insulated Jelly Filled Cables (5 Pair to 400 pair)

KM CABLES & CONDUCTORS are the stockiest for telecommunication cables/ jelly filled cables of the leading brands. The product range that KM Cables Holds include cables of following types:

Description: Twisted pair cable-with solid/foam/foam skin polythene insulated copper conductor, jelly filled, polythene sheathed, bonded poly-Al moisture barrier, unarmored/ armored polythene jacket underground cable.

Application: This type of cable is meant for inter exchange and for local network use. This cable may be unarmored/armored type.

Send Query for Polythene (Solid/Foam/Foam Skin) Insulated Jelly Filled Cables
(5 Pair to 400 pair)

Overhead Cables & Wires Aerial Cables

Description: Polythene insulated self-supporting aerial cable in which suspension wire and the cable core are contained in a single polythene jacket of a figure of 8 sections.

Application: The cable is intended for use as a telephone distribution cable and would be suspended from posts using fixtures. These are normally used in rural/hilly areas.

Send Query for Overhead Cables & Wires Aerial Cables

Optical Fibre Cables Central Loose Tube

Description: The cable is of Central Loose Tube (CLT) structure. Single Mode Optical Fibres are placed in a Loose Tube and jelly is applied during the extrusion process. Three FRP's are embedded in the sheathing.

Application: Trunk & Junction Network, T.V. Distribution, Data Links, Telemetry, Short span aerial application on existing open air alignment network.

Send Query for Optical Fibre Cables Central Loose Tube

Slotted Core

Description: Primary coated single mode optical fibre is placed in the helical slots of a central strength member extruded with polypropylene. The Cable core is polyethylene sheathed and Nylon jacketed to make it rodent resistant and termite proof.

Send Query for Slotted Core

Application: Trunk & Junction Network, T.V. Distribution, Data Links, and Telemetry

Aerial Optical Fibre Cables

Description: The cable is of Central Loose Tube (CLT) structure. Single Mode Optical Fibres are placed in a Loose Tube and filled with jelly. Over the loose tube a thin layer of jelly is applied during the extrusion process. Three FRP's are embedded in the sheathing. To make it suitable for aerial Application Aramide Yarn is raped over the sheathing and then it is jacketed with Nylon.

Application: Trunk & Junction Network in hilly areas & Data Link in hilly areas.

Send Query for Aerial Optical Fibre Cables